You are bidding on a BRAND NEW NEVER USED Airwolf .30 helicopter ARF (Almost Ready To Fly) Kit.  I purchased this helicopter and it really is too much for me to work on with all of the other things going on in my life, and it seems a little too advanced for me to handle.  The kit was purchased from Tower Hobbies so I am including the information from their website below.  I am also including a link to see the AIRWOLF in action.  The Airwolf is a bell 222 helicopter with mechanics made by CENTURY and has a beautiful airwolf body which has been professionally painted and detailed by CENTURY.  I am selling everything I have in this kit for a fraction of the cost.  Please note the Tower Hobbies information below because it tells you all the neccessay equipment that you may need.  Great time to purchase this kit, just in time for fall.  Also, I have included a BRAND NEW O.S. .37SZ-H ringed Helicopter Engine with this auction.  This engine alone sells for $159.99 on Tower HOBBIES

This auction will be shipped in 1 LARGE BOX I have provided the calculated shipping so that you see that you pay only shipping and I will not charge any additional charge.  INSURANCE IS NOT INCLUDED, but STRONGLY suggested.

Please E-mail me with any questions and good luck bidding.

TOWER HOBBIES INFORMATION BELOW:

Built upon the popular Hawk III Helicopter model, this is the Painted Airwolf ARF Helicopter from Century Helicopters.

FEATURES: Fiberglass fuselage is factory painted in a high-gloss, fuel proof epoxy paint (black with white trim) and has tinted front windshield Fuselage also features plywood inside that the mechanical retract system and main mechanics are mounted to. Factory painted tail fin set, and machine guns are also featured

The main rotor system features a heavy-duty head axle and large main grip bearings, a rigid rotor head, specially designed symmetrical seesaw with large paddles, metal control balls on bell mixers; aileron bellcranks; flybar and washout control arms, a ball bearing supported high tilt flybar and hardened 2.3mm pushrods Aerotech 550mm pre-built, balanced and weighted wood main blades

Main Mechanics feature a ball bearing collective system, metal control balls on all control surfaces (no z bends), an aluminum and composite swashplate, a ball bearing supported spring disengagement top cone start system, 2mm thick aluminum side frames & servo tray, extra large metal clutch and bearing supported clutch bell, large cooling fan with integrated shroud, excellent main shaft located CG and visiable extra large 10oz (295cc) fuel tank

The tail rotor system features a rigid tail boom,2mm hardened plug-in type tail drive shaft, heavy-duty tail rotor control rod, full ball bearing supported tail rotor gearbox with nylon gears, ball bearing supported tail pitch plate and fiberfilled tail blades

INCLUDES: Airwolf .30 ARF model with factory painted fiberglass fuselage, 550mm wood main blades, 3 gear mechanical retract system, aluminum tail boom, 10oz fuel tank, 1.5" foam wheels, and building instructions  

REQUIRES: Engine: ( I HAVE INCLUDED ENGINE, HOWEVER) .32 - .38 Heli Engine Muffler: Required Radio: Minimum 7 channel with 7 servos (2 servos for the retracts) Gyro: Dual Rate Fuel: Heli blend with 15-30% nitro content Remote Glow Adapter Remote Fueling System Tools and field equipment

SPECS: Length: 47.5" (1206mm) Width: 9.5" (241mm) Height: 18" (457mm) Main Rotor: 49.5" (1257mm) Tail Rotor: 9.3" (236mm) Weight: 7-8lbs (3175-3628g)

COMMENTS: This ARF model will still require quite a bit of assembly to get it in the air including installing the main shaft, retracts, tail boom, your choice of engine, your choice of radio equipment and other assembly.

BELOW IS A LINK TO THE CENTRY WEBSITE AND ALSO A LINK TO SEE THE AIRWOLF IN ACTION:

http://www.metacafe.com/watch/208601/rc_airwolf_replica/

http://www.centuryheli.com/products/helikits/cn1070airwolf/index.html?currentid=120